Redistribution between RIP and EIGRP
How to configure redistribution between RIP and EIGRP on packet tracer?
Router0> enable
Router0# configure terminal
Router0(config)# int fa 0/0
Router0(config-if)# ip add 10.0.0.1 255.0.0.0
Router0(config-if)# no sh
Router0(config-if)# exit
Router0(config)# router rip
Router0(config)# version 2
Router0(config-router)# network 10.0.0.0
Router0(config-router# do wr
Router1>en
Router1#conf t
Router1(config)#int fa 0/0
Router1(config-if)#ip add 10.0.0.2 255.0.0.0
Router1(config-if)#no sh
Router1(config-if)#ip add 20.0.0.1 255.0.0.0
Router1(config-if)#no sh
Router1(config)#router rip
Router1(config-router)#ver 2
Router1(config-router)#net 10.0.0.0
Router1(config-router)#exit
Router1(config)#router eigrp 100
Router1(config-router)#net 20.0.0.0
Router1(config-router)#router rip
Router1(config-router)#redistribute ?
connected Connected
eigrp Enhanced Interior Gateway Routing Protocol (EIGRP)
metric Metric for redistributed routes
ospf Open Shortest Path First (OSPF)
rip Routing Information Protocol (RIP)
static Static routes
Router1(config-router)#redistribute eigrp ?
<1-65535> Autonomous system number
Router1(config-router)#redistribute eigrp 100 ?
metric Metric for redistributed routes
<cr>
Router1(config-router)#redistribute eigrp 100 metric ?
<0-16> Default metric
transparent Transparently redistribute metric
Router1(config-router)#redistribute eigrp 100 metric 1
Router1(config-router)#router eigrp 100
Router1(config-router)#red
Router1(config-router)#redistribute rip ?
metric Metric for redistributed routes
<cr>
Router1(config-router)#redistribute rip metric ?
<1-4294967295> Bandwidth metric in Kbits per second
Router1(config-router)#redistribute rip metric 10000 ?
<0-4294967295> EIGRP delay metric, in 10 microsecond units
Router1(config-router)#redistribute rip metric 10000 10 ?
<0-255> EIGRP reliability metric where 255 is 100% reliable
Router1(config-router)#redistribute rip metric 10000 10 255 ?
<1-255> EIGRP Effective bandwidth metric (Loading) where 255 is 100% loaded
Router1(config-router)#redistribute rip metric 10000 10 255 1000 ?
% Unrecognized command
Router1(config-router)#redistribute rip metric 10000 10 255 100 ?
<1-65535> EIGRP MTU of the path
Router1(config-router)#redistribute rip metric 10000 10 255 100 1500?
<1-65535>
Router1(config-router)#redistribute rip metric 10000 10 255 100 1500 ?
<cr>
Router1(config-router)#redistribute rip metric 10000 10 255 100 1500
Router1(config-router)#do wr
Building configuration...
[OK]
Router2> enable
Router2# configure terminal
Router2(config)# int fa 0/1
Router2(config-if)# ip add 20.0.0.2 255.0.0.0
Router2(config-if)# no sh
Router2(config-if)# exit
Router2(config)# router eigrp 100
Router2(config-router)# network 20.0.0.0
Router2(config-router)# do wr
0 comments
Please leave your comments...... Thanks